This deep groove ball bearing, constructed from durable carbon steel, offers robust performance for demanding power transmission applications. Its precise dimensions ensure reliable operation and extended service life.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 34mm |
| Outside Diameter | 53mm |
| Width | 16mm |
Manufactured under strict quality controls, this carbon steel deep groove ball bearing features an inside diameter of 34mm, an outside diameter of 53mm, and a width of 16mm. The high-carbon steel composition provides excellent hardness and wear resistance, making it suitable for moderate to heavy radial and axial loads. Its optimized raceway geometry minimizes friction, contributing to efficient power transfer and reduced heat generation. Ideal for applications requiring consistent and reliable rotational movement.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean shaft and housing thoroughly to remove any debris or contaminants. 2. Gently press or tap the bearing onto the shaft, ensuring it seats fully and squarely. 3. Carefully install the bearing into the housing, ensuring alignment and proper fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft or into the housing. | Use a proper press or bearing installation tool to apply even force. If hand pressure is insufficient, re-check dimensions and tolerances. |
| Installing a contaminated bearing. | Keep bearings in their original packaging until ready for installation. Clean all mating surfaces before installation. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric motors, Pumps, Gearboxes, Conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||