This deep groove ball bearing, constructed from robust carbon steel, offers exceptional radial and axial load support. Engineered for smooth, low-friction operation, it ensures reliable power transmission in critical machinery.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 34mm |
| Outside Diameter | 196mm |
| Width | 23mm |
Built to exacting engineering tolerances, this deep groove ball bearing (34mm ID x 196mm OD x 23mm Width) features a high-carbon steel construction for superior durability and wear resistance. Its hardened raceways and precision-machined balls minimize friction and heat generation, facilitating efficient power transmission. The bearing's design allows for moderate axial loads in both directions, making it suitable for a wide range of power transmission components like gearboxes, electric motors, and conveyor systems operating under moderate to heavy duty cycles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling, applying even pressure to the outer or inner ring respectively. 3. Verify smooth rotation and proper seating after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, potentially damaging the raceways or balls. | Use a bearing press or induction heater for controlled installation, ensuring force is applied to the correct ring. |
| Improper lubrication, leading to premature wear and overheating. | Refer to the manufacturer's lubrication chart for the correct grease or oil type and quantity for the operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Industrial Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||