This deep groove ball bearing, crafted from robust Aluminum 6061, offers exceptional performance in power transmission systems. Its precise dimensions ensure reliable operation in diverse industrial environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 29mm |
| Outside Diameter | 27mm |
| Width | 15mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 29mm and an outside diameter of 27mm with a width of 15mm. Constructed from Aluminum 6061, it exhibits excellent machinability and corrosion resistance, making it suitable for environments where traditional steel bearings may degrade. Its design facilitates high rotational speeds and accommodates axial loads in both directions, ensuring smooth and efficient power transfer in applications such as conveyors, gearboxes, and electric motors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing bore and shaft are clean and free from debris. 2. Carefully align the bearing with the shaft and apply steady, even pressure for insertion. 3. If interference fit is tight, employ controlled heating of the bearing or cooling of the shaft as per standard practice.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft without proper alignment. | Align the bearing perfectly with the shaft before applying any force. Use a bearing press or a specialized mandrel for even pressure. |
| Overheating the bearing during installation. | If heating is necessary, use induction heaters or an oil bath at precisely controlled temperatures (typically not exceeding 120°C for aluminum alloys) to avoid material degradation. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Conveyor systems, Electric motors, Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||