This robust deep groove ball bearing, crafted from high-grade carbon steel, offers exceptional load-carrying capacity and smooth rotational performance for critical power transmission systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 27mm |
| Outside Diameter | 184mm |
| Width | 37mm |
A high-performance industrial component, this deep groove ball bearing is engineered with a 27mm inside diameter, a substantial 184mm outside diameter, and a 37mm width. Constructed from premium carbon steel, it exhibits superior hardness and wear resistance, crucial for enduring heavy radial and axial loads. Its optimized raceway geometry ensures minimal friction and heat generation, contributing to extended service life and operational efficiency in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean, flat, and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force. 3. Verify proper seating and rotation without binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication during installation. | Apply the correct type and amount of lubricant as specified for the application before and during installation. |
| Applying excessive force during mounting, leading to brinelling. | Use a proper bearing press or induction heater for installation, ensuring force is applied to the correct ring (shaft or housing). |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Industrial Gearboxes, Electric Motors, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||