Engineered for superior performance, this deep groove ball bearing features an Aluminum 6061 construction for exceptional strength and corrosion resistance. Precisely manufactured for smooth, low-friction operation in power transmission systems.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 64mm |
| Outside Diameter | 140mm |
| Width | 37mm |
A high-performance industrial component, this deep groove ball bearing boasts an inside diameter of 64mm, an outside diameter of 140mm, and a width of 37mm. Constructed from Aluminum 6061, it offers excellent tensile strength, good machinability, and inherent corrosion resistance, making it suitable for applications where weight reduction and environmental factors are critical. Its design ensures efficient radial and axial load handling, minimizing energy loss and maximizing operational lifespan in dynamic power transmission scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the bearing and the shaft/housing bore thoroughly before installation. 2. Carefully press or gently tap the bearing into its designated housing or onto the shaft, ensuring it is seated squarely. 3. Verify the bearing rotates freely with minimal resistance after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when mounting onto a shaft. | Always apply mounting force to the ring being directly fitted (inner ring for shaft mounting, outer ring for housing mounting). |
| Using excessive force during installation, leading to brinelling or deformation. | Utilize a proper bearing press or a bearing heater for controlled installation. Avoid hammering directly on the bearing. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||