This deep groove ball bearing, constructed from robust carbon steel, provides essential radial and axial load support. Its precise dimensions ensure smooth operation and extended service life in dynamic power transmission systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 23mm |
| Outside Diameter | 81mm |
| Width | 25mm |
Engineered for reliability and performance, this deep groove ball bearing features an inside diameter of 23mm, an outside diameter of 81mm, and a width of 25mm. Manufactured from high-quality carbon steel, it offers excellent hardness, wear resistance, and load-carrying capacity, making it suitable for moderate to high-speed operations. The raceway geometry is optimized for minimal friction and heat generation, ensuring efficient power transfer and long-term operational integrity across a wide range of industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing and mating shaft/housing surfaces thoroughly. 2. Apply a thin, even layer of appropriate lubricant to the bearing's internal components or designated lubrication points. 3. Carefully press or mount the bearing onto the shaft or into the housing, ensuring it is seated squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during mounting, leading to brinelling or damage to the raceways. | Utilize a bearing press or induction heater for controlled and even force application. Ensure proper alignment before pressing. |
| Insufficient or incorrect lubrication, causing premature wear and overheating. | Consult the bearing manufacturer's specifications for the correct lubricant type, quantity, and relubrication intervals. Ensure even distribution. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems, Machine Tools.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||