This carbon steel deep groove ball bearing offers robust performance in power transmission. Its precise dimensions and durable material ensure reliable operation under moderate loads and speeds.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 22mm |
| Outside Diameter | 50mm |
| Width | 27mm |
Specified by design engineers worldwide, this 22mm bore, 50mm outer diameter, and 27mm width deep groove ball bearing is manufactured from high-quality carbon steel. This material offers excellent hardness and wear resistance, making it suitable for a broad range of industrial applications. The raceway geometry is optimized for high-speed operation and can accommodate both radial and axial loads, providing versatility in power transmission systems. Its robust construction ensures extended service life and consistent performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing and the mating shaft/housing surfaces thoroughly. 2. Apply a thin, even layer of compatible lubricant to the bearing raceways and rolling elements. 3. Carefully press the bearing onto the shaft or into the housing, ensuring it is seated squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Utilize a bearing press or induction heater for controlled installation, applying force to the ring being fitted. |
| Incorrect lubrication, either insufficient or incompatible lubricant. | Consult the bearing manufacturer's specifications for the correct lubricant type and quantity for the operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||