This high-performance deep groove ball bearing, crafted from robust carbon steel, is engineered for demanding power transmission applications. Its precise dimensions ensure smooth, efficient operation and extended service life.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 20mm |
| Outside Diameter | 58mm |
| Width | 43mm |
Specified by design engineers worldwide, this deep groove ball bearing offers exceptional load-bearing capacity and rotational speed capabilities. Constructed from high-quality carbon steel, it provides excellent hardness, wear resistance, and dimensional stability. The 20mm inner diameter, 58mm outer diameter, and 43mm width configuration is ideal for applications requiring robust support and minimal radial and axial play. Its low coefficient of friction minimizes energy loss and heat generation, crucial for efficient power transfer in various industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly to remove any contaminants. 2. Gently insert the bearing into the housing or onto the shaft, ensuring it is seated squarely. 3. Apply appropriate axial and radial loads according to manufacturer specifications, avoiding excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a shaft or into a housing that is not within tolerance. | Use proper bearing installation tools such as bearing heaters or presses, and ensure shafts and housings are within recommended dimensional tolerances. |
| Contaminating the bearing during installation. | Always handle bearings with clean hands and in a clean environment. Avoid exposing the bearing to dust, dirt, or debris. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||