This deep groove ball bearing, constructed from robust Aluminum 6061, offers exceptional performance in power transmission systems. Its precise dimensions ensure smooth operation and reliable load bearing for critical industrial applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 19mm |
| Outside Diameter | 182mm |
| Width | 29mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 19mm, an outside diameter of 182mm, and a width of 29mm. Fabricated from Aluminum 6061, it provides excellent corrosion resistance and a favorable strength-to-weight ratio, making it suitable for environments where weight reduction is a consideration. The raceway geometry is optimized for high rotational speeds and moderate axial loads, ensuring efficient power transfer and extended service life in demanding machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully align the bearing with the shaft and housing to prevent cocking. 3. Apply a controlled, even force to seat the bearing; avoid hammering or excessive shock.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a dirty or misaligned shaft. | Thoroughly clean both the shaft and housing, and ensure perfect alignment before attempting installation. |
| Applying impact load directly to the bearing races during installation. | Use a proper bearing installation tool or press, applying force evenly to the bearing's inner or outer ring as appropriate. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric motors and generators, Pumps and compressors, Industrial fans and blowers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||