This Aluminum 6061 deep groove ball bearing offers exceptional corrosion resistance and reduced weight for critical power transmission applications. Engineered for smooth, low-friction rotation under moderate loads.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 57mm |
| Outside Diameter | 142mm |
| Width | 17mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing boasts an inside diameter of 57mm, an outside diameter of 142mm, and a width of 17mm. Constructed from aerospace-grade Aluminum 6061, it delivers superior strength-to-weight ratio, excellent machinability, and inherent corrosion resistance, making it ideal for environments where traditional steel bearings may degrade. Its design accommodates both radial and axial loads, ensuring efficient and reliable power transfer in demanding industrial machinery, automotive components, and specialized equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mounting surfaces and bearing raceways thoroughly. 2. Carefully press or gently tap the bearing into its housing using a bearing installer or appropriate tool, ensuring even pressure. 3. Secure the bearing with any retaining rings or shaft collars as per design specifications, verifying free rotation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper alignment during installation. | Ensure the bearing is perfectly aligned with the shaft and housing bore before applying press-fit force to prevent premature wear or seizure. |
| Excessive force applied to the bearing races. | Apply force only to the ring being pressed (inner ring for shaft mounting, outer ring for housing mounting) to avoid damaging the raceways. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors and Generators, Conveyor Systems, Automotive Drivetrain Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||