This Deep Groove Ball Bearing, constructed from durable carbon steel, offers exceptional load-bearing capacity and smooth rotational performance. Its robust design ensures reliability in demanding power transmission applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 13mm |
| Outside Diameter | 189mm |
| Width | 33mm |
Built to exacting engineering tolerances, this 13mm bore x 189mm outer diameter x 33mm width deep groove ball bearing is manufactured from high-quality carbon steel. This material provides excellent hardness and wear resistance, crucial for components subjected to constant friction and high loads. The precise geometry ensures minimal play and efficient operation, reducing energy loss and extending service life. Its suitability spans applications requiring stable rotational support and the management of both radial and axial loads, such as in industrial machinery, electric motors, and agricultural equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bore are clean and free of debris. 2. Carefully align the bearing with the shaft or housing, applying even pressure. 3. Use appropriate bearing installation tools to press the bearing into place, avoiding hammer blows directly on the bearing races.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying impact force directly to the bearing races during installation. | Always use a bearing installer or press, applying force to the ferrule that is being fitted (inner ring for shaft mounting, outer ring for housing mounting). |
| Incorrect alignment of the bearing with the shaft or housing. | Precisely align the bearing to prevent cocking, which can lead to premature wear and failure. Ensure the shaft and housing are perpendicular to the bearing bore. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Industrial Gearboxes, Electric Motor Shafts, Automotive Drivetrain Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||