This lightweight Deep Groove Ball Bearing, constructed from corrosion-resistant Aluminum 6061, offers reliable performance in light-duty power transmission applications. Ideal for environments demanding reduced weight and material compatibility.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 13mm |
| Outside Diameter | 52mm |
| Width | 13mm |
Specified by design engineers worldwide, this Deep Groove Ball Bearing is precision-manufactured with an inside diameter of 13mm, an outside diameter of 52mm, and a width of 13mm. The choice of Aluminum 6061 alloy provides excellent corrosion resistance and a significantly lower density compared to steel bearings, making it suitable for weight-sensitive applications. This material also offers good machinability and moderate strength for its weight, ideal for moderate radial and axial loads. Its construction facilitates smooth rotational movement and reduced friction in various power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the inner or outer ring respectively. 3. Verify smooth rotation and proper seating before engaging the drive system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the ball cage during installation. | Always apply installation force only to the inner or outer ring of the bearing, never to the cage or balls. |
| Over-tightening or under-tightening shaft or housing fits. | Utilize appropriate fits (interference for shaft, clearance for housing) as per design specifications to prevent premature wear or loosening. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight industrial machinery, Aerospace components, Medical equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||