This deep groove ball bearing, constructed from lightweight yet robust Aluminum 6061, offers superior performance in power transmission systems. Its precise dimensions ensure smooth operation and long service life.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 89mm |
| Outside Diameter | 129mm |
| Width | 42mm |
Engineered for reliability and performance, this deep groove ball bearing boasts an inside diameter of 89mm, an outside diameter of 129mm, and a width of 42mm. The Aluminum 6061 alloy provides excellent corrosion resistance and a favorable strength-to-weight ratio, making it ideal for applications where weight reduction is critical without compromising structural integrity. This material also offers good thermal conductivity, aiding in heat dissipation during operation. It is designed to handle moderate radial and axial loads, ensuring efficient power transfer in dynamic environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing into the housing or onto the shaft, applying even force to avoid tilting. 3. Verify smooth rotation and proper seating after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when pressing onto a shaft. | Always apply force to the inner ring when mounting on a shaft, and to the outer ring when mounting in a housing. |
| Over-tightening mounting bolts, causing housing distortion. | Torque mounting bolts to the manufacturer's specifications to prevent housing deformation. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||