Engineered for reliability, this deep groove ball bearing offers superior load-carrying capacity and reduced friction. Its robust carbon steel construction ensures long service life in critical power transmission systems.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 38mm |
| Outside Diameter | 86mm |
| Width | 39mm |
Specified by design engineers worldwide, this 38mm ID x 86mm OD x 39mm W deep groove ball bearing is manufactured from high-grade carbon steel, offering excellent hardness, tensile strength, and wear resistance. The meticulously controlled heat treatment process enhances its durability, making it ideal for applications subjected to moderate to heavy radial and axial loads. Its precise internal geometry minimizes vibration and noise, ensuring smooth operation and extended bearing life in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing bore and shaft are clean and free from debris. Use appropriate lubrication before mounting. 2. Carefully press or drive the bearing onto the shaft, applying even force to the inner ring only. Avoid hammering directly on the outer ring. 3. Mount the bearing housing, ensuring proper alignment and avoiding excessive force on the outer ring during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply mounting force to the inner ring when pressing the bearing onto the shaft to prevent damage to the raceways. |
| Inadequate or incorrect lubrication. | Use the recommended lubricant type and quantity as specified by the application. Over- or under-lubrication can lead to premature failure. |
| Misalignment during installation. | Ensure the shaft and housing are perfectly aligned before pressing the bearing. Misalignment can induce uneven loads and accelerate wear. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||