This high-performance deep groove ball bearing, constructed from robust Aluminum 6061, offers exceptional durability and corrosion resistance for critical power transmission systems.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 37mm |
| Outside Diameter | 39mm |
| Width | 25mm |
A high-performance industrial component, this deep groove ball bearing features an internal bore of 37mm and an external diameter of 39mm, with a width of 25mm. Manufactured from Aluminum 6061, it provides excellent strength-to-weight ratio, superior corrosion resistance against many industrial fluids, and good thermal conductivity. This material choice makes it ideal for applications where weight reduction or non-magnetic properties are beneficial, ensuring reliable operation in diverse environmental conditions within power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free from debris. 2. Carefully press the bearing onto the shaft using a suitable arbor press or hydraulic press, ensuring even pressure. 3. Gently install the shaft-bearing assembly into the housing, verifying a snug fit without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto an unclean shaft or housing | Thoroughly clean both the shaft and housing bores before installation to prevent damage to bearing races and balls. |
| Applying uneven pressure during mounting | Utilize a proper pressing tool that applies force evenly to the bearing's outer ring or shaft, depending on the mounting method. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Conveyor Systems, Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||