This deep groove ball bearing, constructed from robust carbon steel, offers superior load-bearing capacity and smooth rotational performance. Its precise dimensions ensure efficient power transmission in critical industrial applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 43mm |
| Outside Diameter | 56mm |
| Width | 50mm |
Engineered for reliability and performance, this deep groove ball bearing features an internal diameter of 43mm, an external diameter of 56mm, and a width of 50mm. Manufactured from high-quality carbon steel, it exhibits excellent hardness, wear resistance, and load-carrying capabilities, making it ideal for applications requiring sustained operation under radial and axial loads. The tight dimensional tolerances ensure minimal runout and vibration, contributing to extended equipment life and optimized energy transfer in power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. 2. Apply a light film of appropriate lubricant to the shaft and inner ring. 3. Carefully press the bearing onto the shaft until it is fully seated against the shaft shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft using impact. | Use a press or a bearing installation tool to apply even pressure to the inner ring only. |
| Incorrect lubrication selection or application. | Refer to the equipment manufacturer's specifications for the correct lubricant type and ensure adequate coverage during installation and regular maintenance. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||