This robust Deep Groove Ball Bearing, constructed from high-grade carbon steel, offers exceptional load-bearing capacity and smooth rotational performance for demanding power transmission systems. Its precise dimensions ensure seamless integration and reliable operation.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 98mm |
| Outside Diameter | 80mm |
| Width | 11mm |
Built to exacting engineering tolerances, this Deep Groove Ball Bearing boasts an inside diameter of 98mm and an outside diameter of 80mm, with a width of 11mm. Fabricated from premium carbon steel, it exhibits superior hardness and wear resistance, ensuring consistent performance under radial and axial loads. The hardened raceways and precision-ground balls minimize friction and heat generation, contributing to extended operational life and energy efficiency. Its robust construction makes it ideal for applications requiring sustained, reliable rotation, such as in electric motors, pumps, gearboxes, and conveyor systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing seat and shaft thoroughly to remove any debris or lubricant. 2. Carefully press the bearing onto the shaft or into the housing, ensuring it is seated squarely and without tilting. 3. Apply a suitable lubricant as per equipment manufacturer's specifications and verify free rotation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, leading to brinelling or deformation of the raceways. | Utilize a proper bearing press or induction heater to apply force evenly to the bearing ring that is being mounted, avoiding direct impact on the other ring or rolling elements. |
| Improper lubrication, either insufficient or using an incompatible lubricant, causing premature wear and overheating. | Consult the equipment manufacturer's manual for the correct type and quantity of lubricant. Ensure the lubricant is clean and free from contaminants before application. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Pumps and Compressors, Gearboxes and Transmissions, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||