This deep groove ball bearing, constructed from robust carbon steel, offers exceptional load-bearing capacity and operational efficiency. Its precise dimensions ensure seamless integration into demanding power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 29mm |
| Outside Diameter | 34mm |
| Width | 50mm |
A high-performance industrial component, this deep groove ball bearing is meticulously manufactured from high-carbon steel, renowned for its hardness, wear resistance, and tensile strength, ensuring extended service life under radial and axial loads. With an inside diameter of 29mm, an outside diameter of 34mm, and a width of 50mm, it is engineered for precision fit and minimal play. The material's inherent properties make it suitable for applications requiring high rotational speeds and moderate shock loads, such as electric motors, gearboxes, and conveyor systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. 2. Carefully press or gently tap the bearing onto the shaft, ensuring it seats fully and squarely. 3. Install the bearing into the housing, applying even pressure to avoid misalignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Use a proper bearing installation tool or a controlled press, ensuring force is applied evenly to the bearing's inner ring. |
| Contaminating the bearing during handling or installation. | Keep the bearing in its original packaging until the moment of installation and use clean tools and hands. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||