This robust carbon steel stock sheet, precisely fabricated to 0.210-inch thickness, 43-inch length, and 26-inch width, is an essential component for demanding pneumatic systems. Engineered for superior strength and reliability.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.210" |
| Length | 43" |
| Width | 26" |
Specified by design engineers worldwide, this carbon steel stock sheet boasts a nominal thickness of 0.210 inches, a standard length of 43 inches, and a width of 26 inches. Its high tensile strength and moderate hardness make it ideal for fabricating durable pneumatic enclosures, structural components, and mounting brackets that withstand significant operational pressures and dynamic loads. The material's inherent rigidity ensures precise fitment and long-term performance in critical pneumatic infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Carefully cut and shape the carbon steel sheet according to required pneumatic component designs. 3. Prepare edges for welding or fastening, ensuring clean surfaces for optimal joint strength.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient material thickness for high-pressure pneumatic applications. | Always confirm the required material thickness based on the maximum operating pressure and safety factor of the pneumatic system. |
| Neglecting proper surface preparation before welding or coating. | Thoroughly clean and degrease the carbon steel surface to ensure strong weld integrity and effective coating adhesion, preventing premature corrosion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder bodies, Compressor housings, Air receiver tanks, Pneumatic manifold fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||