This premium carbon steel stock sheet is engineered for superior performance in pneumatic system fabrication. Its substantial dimensions and robust material offer exceptional durability and structural integrity for critical applications.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.804" |
| Length | 45" |
| Width | 32" |
A high-performance industrial component, this carbon steel stock sheet is precisely manufactured to exacting standards. Measuring 0.804 inches in thickness, 45 inches in length, and 32 inches in width, it provides substantial material for fabricating robust pneumatic enclosures, support structures, and custom components. The inherent strength and formability of carbon steel ensure reliability under pressure and mechanical stress, making it ideal for demanding pneumatic applications where structural integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Fabricate components according to engineering drawings and specifications. 3. Securely integrate fabricated parts into the pneumatic system assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard mild steel which may not withstand pneumatic system pressures. | Always specify and utilize carbon steel sheets with material certifications appropriate for the intended pressure and stress loads. |
| Inadequate edge preparation leading to stress concentrations during fabrication. | Properly deburr and chamfer all cut edges to prevent premature failure and ensure smooth assembly. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic control panel fabrication, High-pressure pneumatic cylinder housings, Custom pneumatic manifold construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||