This premium carbon steel stock sheet provides a foundation of exceptional strength and durability for demanding pneumatic system components. Engineered for longevity and performance in industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.371" |
| Length | 42" |
| Width | 44" |
Built to exacting engineering tolerances, this 0.371-inch thick carbon steel stock sheet, measuring 42 inches by 44 inches, is manufactured from high-grade carbon steel to ensure superior tensile strength and rigidity essential for pneumatic component fabrication. Its precise dimensions and consistent material properties facilitate accurate machining and assembly, crucial for maintaining seal integrity and operational efficiency within high-pressure pneumatic systems. This sheet's robust nature makes it ideal for creating pressure vessels, structural supports, and critical enclosures where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the required component dimensions on the carbon steel stock sheet. 2. Utilize appropriate cutting and machining tools, adhering to safety protocols, to fabricate the pneumatic component. 3. Clean all fabricated surfaces thoroughly to remove any debris or residue before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or non-specific fasteners for pneumatic component assembly. | Always utilize fasteners that meet or exceed the pressure and tensile requirements of the pneumatic system as specified by design engineering. |
| Inadequate surface preparation prior to welding or sealing operations. | Ensure all surfaces to be joined are meticulously cleaned and free of contaminants to achieve a robust and leak-free seal. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder bodies, Air receiver tanks, Manifold blocks, Heavy-duty pneumatic component housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||