This 0.621-inch thick carbon steel stock sheet offers exceptional durability and dimensional stability. Ideal for creating custom measuring tools, inspection fixtures, and precision jigs in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.621" |
| Length | 43" |
| Width | 30" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a precise 0.621" thickness, ensuring accurate measurements and consistent material properties. Its robust 43" length and 30" width provide ample material for a wide range of fabrication and tooling projects. The inherent strength and rigidity of carbon steel make it an excellent substrate for applications requiring high wear resistance and dimensional integrity, preventing deformation under load or environmental changes. This material is well-suited for machining, grinding, and surface treatments to achieve extremely tight tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface thoroughly to remove any contaminants. 2. Position the sheet accurately for the intended application. 3. Secure the sheet using appropriate fasteners or mounting methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor adhesion or alignment. | Always ensure a clean, dry, and smooth surface before installation or use. |
| Over-tightening fasteners, causing deformation or stress on the sheet. | Use torque specifications appropriate for the material thickness and fastener type. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom measuring fixtures, Precision inspection gauges, Jig and fixture bases, Prototyping and tooling development.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||