This robust carbon steel stock sheet provides a stable, flat surface for critical measuring and inspection tasks. Engineered for dimensional accuracy and durability, it's an essential component in quality control and manufacturing environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.119" |
| Length | 43" |
| Width | 26" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet boasts a thickness of 0.119 inches, ensuring minimal deviation for accurate measurements. Its substantial dimensions of 43 inches in length and 26 inches in width offer ample surface area for a variety of inspection fixtures and layout work. The carbon steel composition provides excellent rigidity, wear resistance, and a stable platform that is unaffected by moderate temperature fluctuations. This makes it suitable for applications requiring high dimensional integrity and longevity under rigorous industrial conditions, such as precision layout tables, inspection platens, and fixture bases.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free of debris. 2. Carefully position the carbon steel stock sheet onto the prepared surface. 3. Secure the sheet using appropriate fasteners (e.g., cap screws, bolts) at designated intervals, ensuring consistent clamping pressure across the entire surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Mounting the sheet on an uneven surface, leading to distortion and inaccurate measurements. | Always verify and prepare the mounting surface to be perfectly level and stable before installation. |
| Over-tightening fasteners in localized areas, causing stress and potential warping of the sheet. | Tighten fasteners gradually and in a pattern (e.g., alternating corners) to ensure even pressure distribution. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Precision Measuring and Inspection Surfaces, Layout Tables and Fixture Bases, Quality Control Stations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||