This heavy-duty carbon steel stock sheet is engineered for precision measuring and inspection applications. Its robust construction and tight tolerances ensure reliable performance in demanding industrial settings.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.852" |
| Length | 16" |
| Width | 27" |
A proven choice for industrial professionals, this carbon steel stock sheet offers exceptional rigidity and dimensional stability. Precisely manufactured to a thickness of 0.852 inches, with a length of 16 inches and a width of 27 inches, it provides a flat, consistent surface crucial for accurate measurements and inspections. The inherent strength of carbon steel makes it resistant to deformation, ensuring long-term utility in fabrication, quality control, and as a stable reference plane for various industrial processes. Its material composition guarantees durability and resistance to wear in high-traffic environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free from debris. 2. Position the carbon steel stock sheet onto the designated area, aligning with any pre-drilled mounting points if applicable. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to maintain flatness. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Mounting the sheet on an uneven surface, leading to warping and inaccurate measurements. | Always verify and prepare the mounting surface for flatness and stability before installation. |
| Using non-standard or insufficient fasteners, causing localized stress and potential deformation. | Employ high-quality, appropriately sized fasteners that distribute load evenly across the sheet's surface. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Precision measuring tables, Inspection and calibration platforms, Machining and fabrication work surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||