This high-strength carbon steel stock sheet is engineered for demanding pneumatic systems. Its substantial thickness and precise dimensions ensure structural integrity and reliable performance under pressure.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.592" |
| Length | 38" |
| Width | 17" |
Built to exacting engineering tolerances, this 0.592" thick carbon steel stock sheet offers superior durability and load-bearing capacity critical for pneumatic applications. Measuring 38" in length and 17" in width, it is manufactured from high-grade carbon steel, providing excellent tensile strength and resistance to wear and tear. Its robust composition makes it ideal for fabricating robust pneumatic enclosures, mounting brackets, and structural components that require exceptional rigidity and longevity in industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of obstructions. 2. Precisely measure and mark the desired dimensions on the carbon steel sheet. 3. Carefully cut the sheet using appropriate industrial cutting tools (e.g., plasma cutter, abrasive saw). 4. Deburr all cut edges to remove sharp protrusions and ensure safety.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel instead of carbon steel for high-pressure pneumatic components. | Always specify and use carbon steel for pneumatic applications to ensure sufficient tensile strength and structural integrity. |
| Neglecting to deburr cut edges, leading to potential safety hazards and damage to seals. | Thoroughly deburr all cut edges after fabrication to create smooth surfaces and prevent injuries or system leaks. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder construction, Industrial compressor housings, Pneumatic manifold fabrication, Heavy-duty pneumatic equipment frames.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||