This high-quality carbon steel stock sheet, designated for lubricating applications, offers superior performance. Its precise dimensions and robust material properties ensure reliability in demanding industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.342" |
| Length | 37" |
| Width | 39" |
Specified by design engineers worldwide, this carbon steel stock sheet is manufactured to exacting standards for lubricating applications. With a nominal thickness of 0.342 inches, a length of 37 inches, and a width of 39 inches, it provides a substantial surface area for fabrication. The material exhibits excellent formability and weldability, characteristic of its carbon steel composition, ensuring efficient integration into complex machinery and systems. Its inherent strength and durability make it ideal for components subjected to friction and requiring consistent lubrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface thoroughly to remove all contaminants. 2. Ensure proper alignment with mating components before fastening. 3. Apply appropriate lubrication as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor lubrication adherence. | Thoroughly degrease and clean the sheet surface using industrial solvents before installation. |
| Over-tightening fasteners, causing deformation of the sheet. | Use torque-controlled fasteners and follow recommended torque specifications for the application. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Bearing surfaces, Slide plates, Conveyor components, Machinery ways.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||