This robust carbon steel stock sheet is engineered for superior performance in demanding pneumatic systems. Its substantial thickness and material strength ensure reliability and longevity in critical applications.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.338" |
| Length | 22" |
| Width | 32" |
Precision-manufactured to tight tolerances, this 0.338-inch thick carbon steel stock sheet measures 22 inches in width and 32 inches in length. The high tensile strength and yield strength of carbon steel make it an ideal substrate for fabricating robust pneumatic components such as pressure vessels, actuator housings, and valve bodies. Its excellent machinability and weldability allow for intricate designs and secure assembly, ensuring dependable operation under high-pressure conditions. This material offers a cost-effective solution for applications where durability and structural integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before fabrication. 2. Utilize appropriate cutting and forming techniques for 0.338" carbon steel, such as plasma cutting or laser cutting. 3. Follow established welding procedures for carbon steel to ensure strong, leak-proof joints for pneumatic assemblies.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient welding consumables for the carbon steel thickness. | Select welding electrodes or wire with a strength rating appropriate for 0.338" carbon steel to prevent joint failure. |
| Inadequate surface preparation before welding, leading to porosity. | Thoroughly clean the weld area of rust, mill scale, and oil using a wire brush or grinding wheel before proceeding with welding. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Cylinder Fabrication, Pressure Vessel Construction, Air Reservoir Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||