This heavy-gauge carbon steel stock sheet provides exceptional strength and durability for critical pneumatic system components. Precisely manufactured for demanding industrial environments, ensuring reliable performance.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.271" |
| Length | 41" |
| Width | 47" |
Purpose-built for heavy-duty applications, this 0.271" thick carbon steel stock sheet offers superior structural integrity. Its substantial dimensions of 41" in length and 47" in width allow for versatile fabrication of robust pneumatic enclosures, mounting brackets, and structural supports. The inherent strength and resilience of carbon steel make it ideal for environments subjected to high pressures, impact, and significant mechanical stress, ensuring long-term operational reliability and safety in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is cut to the required dimensions according to design specifications. 2. Prepare mounting surfaces for optimal support and load distribution. 3. Securely fasten the fabricated component using appropriate industrial-grade fasteners and welding techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-pressure pneumatic applications. | Always select stock sheet thickness that significantly exceeds the anticipated operating pressures and mechanical loads to prevent premature failure. |
| Inadequate surface preparation before fabrication or coating. | Thoroughly clean and degrease the carbon steel surface to ensure proper adhesion of any protective coatings and prevent corrosion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic control panel fabrication, Heavy-duty cylinder mounting brackets, Industrial pneumatic system enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||