This Schedule 40 seamless carbon steel pipe offers superior integrity for critical fluid conveyance and structural support. Engineered for robust performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 3.3" |
| Outside Diameter | 3.881" |
| Wall Thickness | 0.100" |
Precision-manufactured to tight tolerances, this 3.3" IPS (nominal pipe size) seamless carbon steel pipe adheres to ASME B36.10M standards. It features an outside diameter of 3.881 inches and a precisely controlled wall thickness of 0.100 inches, resulting in a nominal schedule of 40. The inherent strength and weldability of carbon steel make it suitable for moderate to high-pressure applications. Its seamless construction eliminates any weld seam vulnerabilities, ensuring maximum resistance to leaks and bursts under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify pipe dimensions and material grade against project specifications. 2. Clean pipe ends thoroughly to remove debris and prepare for joining. 3. Install using appropriate joining methods (e.g., welding, threading) according to industry best practices and applicable codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe size for the application's flow rate or pressure requirements. | Consult hydraulic calculations and pressure drop charts to select the appropriate pipe size and schedule for your system. |
| Improper cleaning of pipe ends, leading to poor weld quality or leaks. | Ensure pipe ends are free from rust, scale, paint, and other contaminants before welding or threading. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid transport systems, Structural support in industrial frameworks, General purpose piping for steam, water, and gas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||