This industrial O-ring, crafted from robust carbon steel, provides superior sealing integrity. Engineered for high-pressure environments, its precise dimensions ensure a reliable, long-lasting seal in critical applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 2.248" |
| Outside Diameter | 2.751" |
| Cross Section | 0.228" |
Trusted by engineers across multiple sectors, this carbon steel O-ring offers exceptional durability and resistance to wear. With an inside diameter of 2.248 inches, an outside diameter of 2.751 inches, and a precise cross-section of 0.228 inches, it is designed for demanding industrial fluid power systems. The carbon steel composition ensures high tensile strength and resilience, making it suitable for applications requiring robust mechanical properties and reliable sealing under significant stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the shaft or into the groove, avoiding excessive force or sharp tools. 3. Verify the O-ring is properly seated and not twisted within the groove before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a sharp object to install the O-ring, leading to nicks or cuts. | Always use a rounded installation tool or a lubricant to facilitate smooth O-ring placement. |
| Installing a twisted O-ring, which compromises sealing effectiveness. | Visually inspect the O-ring to ensure it lies flat and is not deformed in the groove before system pressurization. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Hydraulic cylinder seals, Pneumatic actuator seals, High-pressure fluid systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||