Engineered for superior sealing performance, this Buna-N O-ring in a polycarbonate housing offers exceptional durability and chemical resistance for demanding industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 1.548" |
| Outside Diameter | 7.186" |
| Cross Section | 0.245" |
Built to exacting engineering tolerances, this industrial O-ring features an Inside Diameter of 1.548 inches, an Outside Diameter of 7.186 inches, and a Cross Section of 0.245 inches. The Buna-N (Nitrile Butadiene Rubber) material provides excellent resistance to oils, fuels, and many hydraulic fluids, making it suitable for a wide range of sealing applications. The polycarbonate housing enhances structural integrity and provides additional protection against abrasion and impact, ensuring reliable sealing under moderate pressure and temperature conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free from debris. 2. Carefully stretch the O-ring over the component, avoiding any sharp edges or pinching. 3. Gently seat the O-ring into its designated groove, ensuring it is evenly positioned.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or stretching the O-ring excessively during installation. | Install the O-ring with minimal stretch, allowing it to seat naturally within the groove to prevent premature wear or failure. |
| Using the wrong O-ring material for the specific fluid or environmental conditions. | Verify the chemical compatibility of Buna-N with the intended application's fluids and operating temperatures to ensure optimal performance and longevity. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic cylinders, Fluid power transmission.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||