Engineered for superior performance, this Buna-N O-Ring, crafted from Titanium Grade 5, offers exceptional resilience in harsh industrial settings. Its precise dimensions ensure reliable sealing under pressure and temperature extremes.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.975" |
| Outside Diameter | 10.403" |
| Cross Section | 0.252" |
Designed for demanding industrial environments, this O-ring features a precise Inside Diameter of 9.975 inches, an Outside Diameter of 10.403 inches, and a Cross Section of 0.252 inches. The Buna-N elastomer provides excellent resistance to oils, fuels, and hydraulic fluids, while the Titanium Grade 5 material offers superior corrosion resistance and mechanical strength, making it suitable for high-pressure, high-temperature applications in aerospace, automotive, and chemical processing industries where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully place the O-ring into the groove, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant if necessary to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently guide the O-ring into the groove, using a non-metallic tool if needed, to prevent permanent deformation and loss of sealing capability. |
| Installing into a contaminated or damaged groove. | Thoroughly inspect and clean the sealing groove before installation to ensure a proper seal and prevent premature failure. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Hydraulic Systems, Pneumatic Actuators, Fuel and Oil Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||