This high-performance industrial O-ring, manufactured from robust Buna-N and featuring a Titanium Grade 5 construction, offers exceptional sealing capabilities. Engineered for demanding applications requiring superior chemical and temperature resistance.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.216" |
| Outside Diameter | 7.851" |
| Cross Section | 0.075" |
Specified by design engineers worldwide, this industrial O-ring boasts an Inside Diameter of 8.216 inches and an Outside Diameter of 7.851 inches, with a precise Cross Section of 0.075 inches. The Buna-N elastomer provides excellent resistance to oils, fuels, and hydraulic fluids, while the Titanium Grade 5 construction ensures unparalleled corrosion resistance, high tensile strength, and performance across a broad temperature range. This combination makes it ideal for aerospace, chemical processing, and severe-duty automotive applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Visually inspect the mating groove and the O-ring for any foreign debris or damage. 2. Apply a thin, compatible lubricant to the O-ring and the groove. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or cuts. | Apply appropriate lubrication and use precision tools if necessary to avoid damaging the O-ring. |
| Incorrect groove preparation, leaving sharp edges or contaminants. | Thoroughly clean and de-burr the mating groove before O-ring installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: High-pressure hydraulic systems, Chemical processing equipment, Aerospace fluid connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||