This industrial O-ring features a robust Buna-N sealing element encased in a high-strength Titanium Grade 5 housing. Engineered for extreme environments, it provides exceptional sealing integrity and durability in critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 7.074" |
| Outside Diameter | 7.310" |
| Cross Section | 0.078" |
Specified by design engineers worldwide, this industrial O-ring boasts a nominal inside diameter of 7.074 inches and an outside diameter of 7.310 inches, with a precise cross-section of 0.078 inches. The Buna-N elastomer offers excellent resistance to oils, fuels, and many hydraulic fluids, while the Titanium Grade 5 housing provides superior corrosion resistance, high tensile strength, and a broad operating temperature range. This combination makes it ideal for demanding aerospace, marine, and chemical processing applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of any debris or sharp edges. 2. Carefully install the O-ring into the groove, avoiding stretching or twisting. 3. Apply a light coat of compatible lubricant if recommended for the specific application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring extrusion or damage. | Apply gentle, consistent pressure, ensuring the O-ring seats properly within the groove without being forced. |
| Installing on a dirty or damaged surface, compromising the seal. | Thoroughly inspect and clean the sealing groove before O-ring installation to guarantee a clean mating surface. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, Marine propulsion seals, Chemical processing equipment, High-pressure fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||