This high-performance Buna-N O-ring, constructed from advanced Titanium Grade 5, offers exceptional sealing capabilities in extreme industrial environments. Its precise dimensions ensure a secure fit and reliable performance.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.871" |
| Outside Diameter | 7.244" |
| Cross Section | 0.071" |
Manufactured under strict quality controls, this industrial O-ring features a nominal inside diameter of 5.871 inches, an outside diameter of 7.244 inches, and a precise 0.071-inch cross-section. The Buna-N (Nitrile) material provides excellent resistance to oils, fuels, and many hydraulic fluids, while the Titanium Grade 5 construction imparts superior strength, corrosion resistance, and broad temperature tolerance. This combination makes it ideal for applications requiring robust sealing against aggressive media and challenging operating conditions, ensuring long-term service life and operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating grooves are clean, free of debris, and properly dimensioned. 2. Apply a thin, compatible lubricant to the O-ring and groove if recommended for the application. 3. Carefully install the O-ring, avoiding stretching or twisting, ensuring it sits flush within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears. | Apply a compatible lubricant and use appropriate tools to gently seat the O-ring, avoiding direct contact with sharp edges. |
| Selecting an O-ring material not compatible with the fluid or temperature environment. | Always verify material compatibility with the specific operating conditions and media before selection. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Hydraulic systems, Pneumatic assemblies, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||