Engineered for robust sealing in harsh industrial environments, this Buna-N O-Ring, constructed with a durable Carbon Steel core, ensures reliable performance and longevity under pressure.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.537" |
| Outside Diameter | 7.401" |
| Cross Section | 0.240" |
Built to exacting engineering tolerances, this Buna-N O-Ring features a precise Inside Diameter of 9.537 inches, an Outside Diameter of 7.401 inches, and a Cross Section of 0.240 inches. The Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to oils, fuels, and many hydraulic fluids, making it suitable for moderate to high-pressure systems. The embedded Carbon Steel enhances structural integrity and dimensional stability, preventing extrusion and ensuring a tight seal in demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully position the O-ring within its designated groove, ensuring it is seated evenly. 3. Avoid stretching or twisting the O-ring during installation to prevent premature failure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure. If resistance is met, re-evaluate O-ring seating and groove condition. |
| Incorrect O-ring size selection for the groove dimensions. | Always verify O-ring dimensions against groove specifications to ensure proper compression and sealing. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic cylinders, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||