This industrial O-ring, crafted from Buna-N within a robust carbon steel housing, provides exceptional sealing performance. Engineered for durability and chemical resistance, it's ideal for critical applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.588" |
| Outside Diameter | 6.852" |
| Cross Section | 0.087" |
Built to exacting engineering tolerances, this Buna-N O-ring features an inside diameter of 8.588 inches, an outside diameter of 6.852 inches, and a precise cross-section of 0.087 inches. The Buna-N material offers excellent resistance to oils, fuels, and hydraulic fluids, making it suitable for a wide range of industrial environments. The carbon steel housing provides structural integrity and enhances its performance in high-pressure scenarios. This combination ensures a secure and long-lasting seal against leakage in demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Carefully place the O-ring into the designated groove, avoiding excessive stretching. 3. Apply a thin layer of compatible lubricant if recommended for the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently guide the O-ring into the groove, minimizing elongation to prevent premature failure. |
| Installing on dirty or damaged mating surfaces. | Thoroughly clean and inspect all sealing surfaces for nicks, burrs, or contamination before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic cylinders, Fuel and oil lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||