Engineered for demanding environments, this Buna-N O-ring, housed within an Aluminum 6061 substrate, offers exceptional sealing performance. Its precise dimensions ensure a reliable fit and superior resistance to common industrial fluids.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 2.860" |
| Outside Diameter | 0.895" |
| Cross Section | 0.212" |
Trusted by engineers across multiple sectors, this industrial O-ring is manufactured with a robust Buna-N elastomer bonded to a precision-machined Aluminum 6061 housing. The specified Inside Diameter of 2.860", Outside Diameter of 0.895", and a Cross Section of 0.212" provide a secure and reliable seal in dynamic and static applications. Aluminum 6061 offers excellent corrosion resistance and good machinability, making it suitable for a wide range of chemical exposures and operating temperatures. This combination ensures longevity and high integrity in critical sealing functions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully compress the O-ring into its designated groove, avoiding any pinching or stretching. 3. Verify proper seating and even compression around the entire circumference.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing excessive O-ring compression and premature failure. | Adhere to specified torque values for all fasteners to prevent over-compression. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult material compatibility charts and use only approved lubricants and cleaners for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic cylinders, Chemical processing equipment, Automotive fluid seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||