Engineered for superior sealing in harsh industrial environments, this Buna-N O-ring features a robust 6061 Aluminum carrier. It offers exceptional resistance to oils, fuels, and hydraulic fluids, ensuring reliable performance.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.071" |
| Outside Diameter | 3.537" |
| Cross Section | 0.199" |
Specified by design engineers worldwide, this industrial O-ring is constructed with a Buna-N elastomer bonded to a precision-machined 6061-T6 Aluminum housing. The internal diameter measures 1.071 inches, with an external diameter of 3.537 inches, and a substantial 0.199-inch cross-section. This combination provides excellent compression set resistance and a broad operating temperature range, making it ideal for high-pressure hydraulic systems, fuel lines, and automotive applications where chemical compatibility and dimensional stability are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris. 2. Carefully position the O-ring within its designated groove, avoiding excessive stretching or twisting. 3. Apply a thin, compatible lubricant if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing the O-ring without proper lubrication in tight grooves. | Apply a small amount of approved lubricant to the O-ring and groove to ease installation and prevent nicks or tears. |
| Using excessive force during installation, leading to O-ring damage. | Gently guide the O-ring into the groove, ensuring it seats evenly without being pinched or rolled. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic Systems, Fuel Delivery Systems, Automotive Powertrain Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||