This industrial Buna-N O-ring, precisely manufactured from Aluminum 6061, offers exceptional sealing performance. Its robust design ensures reliable operation in demanding environments, maintaining integrity under pressure and temperature fluctuations.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.124" |
| Outside Diameter | 3.160" |
| Cross Section | 0.257" |
Trusted by engineers across multiple sectors, this industrial O-ring is fabricated from high-grade Buna-N (Nitrile Rubber) for excellent resistance to oils, fuels, and hydraulic fluids. The robust Aluminum 6061 material provides structural integrity and corrosion resistance. With an inside diameter of 9.124 inches, an outside diameter of 3.160 inches, and a cross-section of 0.257 inches, this O-ring is engineered for precise fitment in critical sealing applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Carefully place the O-ring onto the designated groove or shaft, avoiding any stretching or twisting. 3. Apply a thin layer of compatible lubricant if recommended for the application to facilitate seating and prevent damage during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can crush the O-ring and lead to premature failure. | Follow manufacturer's recommended torque specifications for all fasteners. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult the Buna-N compatibility chart and use only approved lubricants and cleaning solutions. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic assemblies, Automotive seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||