This industrial-grade Buna-N O-ring offers robust sealing capabilities. Engineered for reliable performance, its precise dimensions and durable material ensure effective containment in critical applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 8.776" |
| Outside Diameter | 9.717" |
| Cross Section | 0.094" |
A proven choice for industrial professionals, this Buna-N O-ring features an inside diameter of 8.776 inches, an outside diameter of 9.717 inches, and a precise 0.094-inch cross-section. Constructed from nitrile butadiene rubber (Buna-N), it exhibits excellent resistance to petroleum-based oils, fuels, and hydraulic fluids, making it ideal for a wide range of demanding industrial environments. Its inherent resilience and compression set resistance ensure long-term sealing integrity under moderate pressure and temperature variations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully place the O-ring into the groove, avoiding stretching or twisting. 3. Apply a light, compatible lubricant if necessary to facilitate seating and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive tension, allowing it to seat naturally within the groove. |
| Using incompatible lubricants that degrade the Buna-N material. | Consult a chemical compatibility chart to select a lubricant specifically approved for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic equipment, Fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||