This high-quality Buna-N O-ring provides reliable sealing in demanding industrial environments. Engineered for durability and chemical resistance, it ensures leak-free performance across various applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 8.581" |
| Outside Diameter | 8.441" |
| Cross Section | 0.087" |
Manufactured under strict quality controls, this Buna-N O-ring features precise dimensions: an Inside Diameter of 8.581", an Outside Diameter of 8.441", and a Cross Section of 0.087". Buna-N (Nitrile) offers excellent resistance to petroleum-based oils, greases, hydraulic fluids, and many common solvents, making it suitable for a wide range of general industrial sealing tasks. Its robust compound ensures durability and longevity under moderate temperature and pressure conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free from debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Gently seat the O-ring into its designated groove, confirming a uniform fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a size larger or smaller than specified. | Always verify O-ring dimensions against the component's groove specifications to ensure proper compression and sealing. |
| Damaging the O-ring during installation. | Utilize appropriate O-ring installation tools and avoid sharp edges or excessive stretching to prevent nicks and tears. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic cylinders, General fluid power, Petroleum-based fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||