This industrial O-ring, crafted from robust Buna-N (Nitrile Butadiene Rubber) and featuring a polycarbonate construction, ensures superior sealing in challenging environments. Its precise dimensions guarantee a secure and leak-proof fit.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 8.458" |
| Outside Diameter | 1.561" |
| Cross Section | 0.221" |
Engineered for reliability and performance, this industrial O-ring is manufactured from Buna-N (Nitrile Butadiene Rubber) renowned for its excellent resistance to oils, fuels, and hydraulic fluids. The polycarbonate material offers good mechanical strength and chemical inertness, making it suitable for a wide range of industrial applications. With a precise inside diameter of 8.458 inches, an outside diameter of 1.561 inches, and a cross-section of 0.221 inches, this O-ring is designed for optimal compression and sealing efficiency within its intended housing. Its Shore A hardness provides a balance of flexibility and resilience, crucial for maintaining seal integrity under varying pressure and temperature conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, free from debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component or into the groove, avoiding excessive stretching or twisting. 3. Gently seat the O-ring within the groove, verifying it is not pinched or cut.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring nicks or tears. | Apply lubricant and gently maneuver the O-ring into place. If resistance is met, reassess the installation path or O-ring size. |
| Incorrect O-ring size selection, resulting in improper compression or leakage. | Always verify the groove dimensions and O-ring specifications against the design requirements before installation. |
| Installing the O-ring dry in a dynamic application, causing premature wear. | Lubricate O-rings for dynamic applications with a compatible, non-exuding lubricant to reduce friction and wear. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic and pneumatic systems, Automotive fluid handling, Industrial machinery sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||