This industrial O-ring, manufactured from robust 304 stainless steel, offers superior sealing capabilities. Designed with precise dimensions, it ensures leak-proof performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.550" |
| Outside Diameter | 9.543" |
| Cross Section | 0.070" |
Engineered for reliability and performance, this Buna-N O-ring features a precise inside diameter of 7.550 inches and an outside diameter of 9.543 inches, with a minimal 0.070-inch cross-section. The 304 stainless steel construction provides excellent corrosion resistance, making it suitable for a wide range of chemical and temperature exposures. Its high tensile strength and elongation properties ensure a tight, resilient seal under pressure, effectively preventing fluid or gas leakage in critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris, burrs, or nicks. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate installation and prevent damage. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants that can degrade the Buna-N material. | Refer to chemical compatibility charts to select a lubricant specifically approved for Buna-N elastomers. |
| Overstretching or twisting the O-ring during installation, leading to premature failure. | Install the O-ring carefully, avoiding excessive stretching and ensuring it sits flat within the groove without any twists. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic and pneumatic systems, Fluid handling equipment, Automotive and aerospace seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||