High-performance Buna-N O-ring engineered with a precise Aluminum 6061 core for exceptional sealing integrity. Designed for robust performance in challenging industrial applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.155" |
| Outside Diameter | 6.309" |
| Cross Section | 0.131" |
Manufactured under strict quality controls, this industrial O-ring features an Inside Diameter of 7.155 inches, an Outside Diameter of 6.309 inches, and a Cross Section of 0.131 inches. The Buna-N elastomer provides excellent resistance to oils, fuels, and hydraulic fluids, while the Aluminum 6061 core offers enhanced structural integrity and resistance to deformation under pressure. This combination ensures reliable static and dynamic sealing in a wide range of operating temperatures and pressures, making it ideal for fluid power systems, automotive, and manufacturing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and mating surfaces are clean, dry, and free from burrs or debris. 2. Carefully install the O-ring into the designated groove, avoiding stretching or twisting. 3. Assemble mating components, applying light, even pressure to seat the O-ring properly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing excessive O-ring compression and premature failure. | Adhere to specified torque values during assembly. Ensure the O-ring is properly seated before full compression. |
| Using a sharp object to install the O-ring, leading to cuts or nicks. | Employ a rounded or plastic installation tool. Hand installation is preferred when feasible. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic Cylinders, Pneumatic Actuators, Fuel Systems, Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||