This industrial Buna-N O-ring, constructed from high-grade Polycarbonate, ensures superior sealing performance. Engineered for precise fits, it offers excellent resistance to common industrial fluids and pressure.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.158" |
| Outside Diameter | 2.078" |
| Cross Section | 0.100" |
Engineered for reliability and performance, this industrial O-ring features an Inside Diameter of 7.158 inches, an Outside Diameter of 2.078 inches, and a precise Cross Section of 0.100 inches. Fabricated from robust Buna-N (Nitrile Butadiene Rubber), it exhibits exceptional resistance to oils, fuels, hydraulic fluids, and general chemicals, making it suitable for a wide range of demanding industrial environments. The material's inherent durability and flexibility allow it to maintain a tight seal under varying temperature and pressure conditions, minimizing leakage and downtime.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from burrs or contaminants. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant to prevent tearing during installation. 3. Gently insert the O-ring into the groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring nicks or tears. | Apply a suitable lubricant and utilize a non-marring installation tool if necessary, applying gentle, even pressure. |
| Installing on contaminated or damaged groove surfaces. | Thoroughly clean and inspect the groove for any defects before commencing installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic and pneumatic systems, Automotive fluid systems, Industrial machinery seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||