This robust industrial O-ring, crafted from resilient Buna-N, delivers exceptional sealing performance. Its precise dimensions ensure a secure fit, preventing leaks in critical systems.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 5.718" |
| Outside Diameter | 10.297" |
| Cross Section | 0.131" |
Precision-manufactured to tight tolerances, this industrial O-ring boasts an Inside Diameter of 5.718", an Outside Diameter of 10.297", and a precise Cross Section of 0.131". Constructed from high-quality Buna-N (Nitrile Butadiene Rubber), it exhibits excellent resistance to oils, fuels, hydraulic fluids, and general wear. This material ensures consistent sealing integrity across a moderate temperature range and is ideal for static and dynamic applications where fluid compatibility is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding any sharp edges. 3. Gently seat the O-ring into the groove, ensuring no twists or damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overt stretching or use of sharp tools during installation. | Handle the O-ring with care and use only approved installation tools or gentle manual methods to prevent nicks and tears. |
| Incorrect groove dimension or contamination. | Verify that the groove meets the specified dimensions for this O-ring and thoroughly clean the groove before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic cylinders, Automotive fuel lines, Industrial pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||