Engineered for exceptional resilience, this Buna-N O-ring, manufactured with Aluminum 6061, provides superior sealing in critical industrial operations. Its precise dimensions ensure reliable performance under pressure.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 5.696" |
| Outside Diameter | 0.226" |
| Cross Section | 0.205" |
Purpose-built for heavy-duty applications, this industrial O-ring features an Inside Diameter of 5.696 inches, an Outside Diameter of 0.226 inches, and a Cross Section of 0.205 inches. Constructed from Aluminum 6061, known for its excellent strength-to-weight ratio and corrosion resistance, it is ideal for use in hydraulic systems, pneumatic assemblies, and chemical processing equipment where resistance to petroleum-based fluids and moderate temperatures is paramount. The Buna-N material offers good resilience and a broad operating temperature range, making it a dependable choice for demanding sealing requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for any debris, burrs, or damage. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate installation and prevent tearing. 3. Carefully install the O-ring into its designated groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, crushing the O-ring. | Tighten fasteners to the manufacturer's specified torque values to avoid over-compression. |
| Using incompatible lubricants, degrading the Buna-N material. | Consult the material compatibility chart to select a lubricant suitable for Buna-N and the application's fluid. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic Cylinder Seals, Pneumatic Actuators, Fluid Power Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||