This industrial O-ring, crafted from robust Buna-N (Nitrile Butadiene Rubber), offers superior sealing performance in critical applications. Its precise dimensions ensure a reliable, leak-proof seal.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 5.594" |
| Outside Diameter | 6.315" |
| Cross Section | 0.234" |
Designed for demanding industrial environments, this Buna-N O-ring features an Inside Diameter of 5.594 inches, an Outside Diameter of 6.315 inches, and a 0.234-inch cross-section. Buna-N, also known as Nitrile Butadiene Rubber, provides excellent resistance to petroleum-based oils, hydraulic fluids, and water, making it suitable for a wide range of dynamic and static sealing applications in fluid power systems, automotive components, and general industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly dimensioned. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle pressure and proper tools, ensuring the O-ring seats correctly without being pinched or rolled. |
| Incorrect O-ring size selection for the groove dimensions. | Always verify O-ring and groove dimensions against manufacturer specifications and industry standards before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic cylinders, Pneumatic actuators, Fluid power systems, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||