This industrial-grade Buna-N O-ring, constructed from durable 304 stainless steel, offers exceptional sealing performance in a wide range of operational environments. Its precise dimensions ensure a reliable fit and long service life.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 6.304" |
| Outside Diameter | 9.921" |
| Cross Section | 0.164" |
A proven choice for industrial professionals, this Buna-N O-ring exhibits robust sealing capabilities due to its advanced material composition and precision manufacturing. Engineered with an Inside Diameter of 6.304 inches, an Outside Diameter of 9.921 inches, and a Cross Section of 0.164 inches, it provides a superior seal against common industrial fluids and gases. The 304 stainless steel housing ensures excellent corrosion resistance and mechanical strength, making it ideal for high-pressure and temperature applications where reliability is paramount. Its excellent resilience and resistance to abrasion further contribute to its longevity in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of debris. 2. Carefully inspect the O-ring for any damage or defects. 3. Gently install the O-ring into the designated groove, ensuring it is seated properly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Use proper tools and techniques to avoid excessive stretching, which can lead to premature failure. |
| Installing on a dirty or damaged groove. | Thoroughly clean and inspect the groove before O-ring installation to prevent leaks and seal damage. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic Systems, Pneumatic Systems, Fluid Power Equipment, Chemical Processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||